Sterling silver jewelry has been a popular commodity for thousands of years. One of the obvious reasons is the affordability over other precious metals gold and platinum. The large variety of sterling silver jewelry requires certain knowledge in order to choose the right piece and also keep it in good condition as long as possible. The followings are the most common questions concerning sterling silver jewelry.

How do I clean sterling silver jewelry?
It depends. Usually, it is sufficient to use a jewelry cloth (with two layers of cloths in different colors) that you can get from a jewelry accessory store. Don’t use any hard object to clean sterling silver jewelry; even paper towel could scratch the surface. You should rub any dirt off using a jewelry cloth, not fingernails. Silver-dip is another commonly used sterling silver jewelry cleaner, which can also be obtained from jewelry store. The entire silver jewelry is immerged in the solution for half a minute to a minute and then rinsed with water. Make sure the silver jewelry is not plated with any other metal before using the silver-dip or the plating will be damaged.

Where do I store sterling silver jewelry?
It is very important to store sterling silver jewelry properly when it is not used. The ideal place to store sterling silver jewelry is cool and away from sunlight. Heat and light will turn a silver jewelry yellow and cause it to tarnish quickly. Even indoor light source like florescent lights or light bulbs turn the color of silver jewelry over time. If you expect not to wear a certain piece for a long time, put it in a air-tight bag and store it in a drawer.

What types of silver jewelry plating are there?
Unlike gold and platinum, however, pure silver is rather unstable and oxides rather quickly. Therefore, silver jewelry is usually plated with another metal to protect it from tarnishing. There are two kinds of plating for silver jewelry: nickel and rhodium plating. Nickel plating has a more whitish look and rhodium plating has a darker look. Rhodium is used to plate white gold and platinum jewelry and is much more expensive than nickel, and it give better protection to the silver underneath. On the other hand, some silver jewelry is not plated. For instance, high polished sterling silver jewelry does not have any plating and the surface is polished by machine to render shininess. Also, “oxidized silver” jewelry is oxidized on purpose to give a dark antique look and is not plated with any other metals.

How do I know the purity of my silver jewelry?
The purity of sterling silver refers to 92.5% of silver in the alloy. In order to confirm the purity, the metal itself has to be sent to a laboratory to be tested. However, most of the sterling silver jewelry produced nowadays has a “925″ stamp to indicate the authenticity of the jewelry. Although there are cases where stamps are forged and the metal is either not silver or the purity is not as stated, they are very rare.

How about engraving and resizing?
Engraving and resizing of sterling silver rings is rather simple due to the ductility and relatively low melting point. However, make sure your jeweler understands the process of refinishing the ring and that they possess the necessary equipment to do so. Not all jewelers have the equipment to recoat the rhodium plating after cutting and welding the ring. Also, rings set with stones are sometimes not resizable because resizing might cause the stones to pop out. Such settings include channel and invisible settings.

Can I wear sterling silver jewelry if I am allergic to nickel?
Yes, just make sure the jewelry is pure sterling silver, not plated with nickel. Even Rhodium plated sterling silver jewelry sometimes contains a nickel layer between the silver and the rhodium to act as an adhesive. Hence, buy only high polished sterling silver jewelry if you are allergic to nickel.

Watch the video related to silver jewelry

This short movie features many of my new and exciting jewelry designs and pieces. All of the pieces are hand mined, smelted, and crafted from the Santo Domingo, New Mexico, Raincloud Silver Mine near Santa Fe, NM by our tribe. It is the last fully operational “Green” mine of its kind in the USA. Many of the techniques which we use in the making of this jewelry have been lost to others for centuries.

Help answer the question about silver jewelry

About Author

Greg Peterson got his MBA from MIT business school and is now working as marketing manager for jewelry businesses featuring wholesale sterling silver jewelry and wholesale hip hop jewelry.

The historic price ratio of silver to gold shows that about 10 ounces of silver would buy one ounce of gold, a 10:1 ratio. Recently, the ratio is about a 50:1 ratio (with silver at $20/oz., and gold at $1000/oz.) As the silver to gold ratio returns to historic values, from 50:1 to 10:1, you may make over 5 times more money investing in silver, than gold!

More than all of the silver produced by the mines each year is consumed by industry, which leaves little to no room for substantial investment demand. A marginal increase in investment demand will drive prices sky high.

Most silver is produced as a by-product of mining gold, copper, zinc, or lead. Higher silver prices might not substantially increase the amount of silver mined each year. Consider, in 1980, when silver prices went up to $50/oz., less silver was mined than in 1979.

So watts this mean to the jewelry sector ?.Simple a huge increase in the cost of silver jewelry and with that will come a bigger demand by the general public.

Now this is were it gets tricky ,if you are a jewelry retail shop or a customer you have to be sure that the silver your selling or the silver jewelry item your buying is of the highest standard,98%fine silver is the best.It is quickly becoming the new fashion standard.

At present 90% of all silver is made to a standard 925%Sterling silver,which means it has a small amount of impurities added ,However for an investment this just isn’t good enough .and it gets worse ,if you do buying trips for silver from lets say to Asian countries,the majority of silver in street stalls would not pass the assay test 925 that’s because the manufacturer has added large amounts of copper or bronze with the silver in order to be able to sell it cheap.

There are no tricks to buying silver ,firstly you must establish a good customer relationship with a reputable manufacture or wholesaler.

Secondly he should be happy to provide documentation of were the raw silver comes from with a assay test certificate.

Thirdly try and buy silver that’s Monogrammed,Customers love having designer name brands such as KDL,and you will find that if a manufacturer is name stamping his silver jewelry he has a reputation to protect.

So to sum things up ,Yes invest in silver jewelry ,but only in 98%pure silver ,wear it ,use it and wait for the price increase then you truly have a valuable asset ,you can even have it melted down and re sell the silver .Its a win win over gold .Even if gold increases in price it will not match the percentage profit that silver is now starting to return.

Watch the video related to silver jewelry

A super easy way to clean up tarnished jewelry. As a jewelry designer, I use this all the time! www.prismera.wordpress.com.

Help answer the question about silver jewelry

About Author

I have been Manufacturing silver and gold jewelry for 10yrs ,and specialize in fine silver and 24karet gold .Together with my wife we have helped hundreds of retailers reach there marketing goals. www.silver925-wholesale.com .

Profit demands are reducing the sources for quality wholesale custom sterling silver jewelry manufacturers daily. Some now prefer to produce the more lucrative gold jewelry and most of the others will only accept very large orders. Samsoneinc.com is one of the few quality
wholesale custom sterling silver jewelry manufacturers that will produce small quantities of custom designs at a reasonable price.

Quality wholesale custom sterling silver jewelry manufacturing starts with good craftsmanship and materials. The basic information needed to create wholesale custom sterling silver jewelry are the designs, the volume of the order, the metal weight and, for the manufacturer to properly calculate silver weight and cost, the dimension of the jewelry and gemstones required must be given. Of these, the order volume will have the greatest impact on the final cost.

Once we receive this information and a sample of the design at Samsoneinc.com, there is an $80 charge for making the mold of the design and a minimum order quantity of 50 pieces per style with a required 50% deposit. Usually it takes us 4-6 weeks to manufacture custom sterling silver jewelry.
In cases where the order volume is very large, the charge for the mold can be waived.

If you are using gemstones and/or diamonds in your designs, take care to discuss the selection process beforehand. Be aware when you are choosing a manufacturer for your wholesale custom sterling silver jewelry that very often you will find manufacturers who use extremely low grade diamonds and gemstones, which can be effected by poor color, inclusions, cracks and other flaws to cut costs.

To produce quality wholesale custom sterling silver jewelry you need a certain metal weight. When you use a light weight of silver, the costs may be cheaper, but the result is jewelry that will bend or twist at the slightest impact. It will prevent your gemstones or diamonds from being firmly mounted, resulting in frequent repairs which is not the ideal for sterling silver jewelry.

Bear in mind that wholesale custom sterling silver jewelry manufacturing is a labour intensive process that requires skilled craftsmen, which are not easy to find and whose fees are quite substantial.

Although your wholesale custom sterling silver jewelry will be made by a mechanical casting process, it requires hand finishing by skilled craftsmen to be complete. Time is a factor in this process, but this is the best way to ensure good quality wholesale silver jewelry.

The good news is that re-orders of the same design will cost less than the initial one, because the mold is already made. Outside of this factor, remember that the cost of the silver and gemstones can vary and this will affect the total cost.

Samsoneinc.com can provide you with exquisite wholesale custom sterling silver jewelry pieces, which are perfect accessories for any occasion.